A SERVICE OF

logo

Open as PDF
next previous
Motor, Delivery Head Position
1 Remove the left cover (see Figure 6-65).
2 Unplug the cable connector (Figure 6-82, callout 1).
3 Remove (2) screws, CH112 (Figure 6-82, callout 2), slide the motor
downward to release it from the frame, and lift it straight out of the frame.
To Reinstall:
Make sure that the motor is positioned in the frame with the cable
grommets facing down. Make sure that the motor cable connector is
plugged into the correct mating connector.
Multi-Bin Mailbox/Mailbox with Stapler, Delivery Head Motor
Figure 6-82
6
Removal and
Replacement
Removal and Replacement 6-95