A SERVICE OF

logo

Open as PDF
next previous
Laser/Scanner Assembly
Caution
The Laser Scanner diode is extremely sensitive to ESD.
1 Remove the toner cartridge.
2 Remove the top cover (see Figure 6-8).
3 Unplug three cable connectors (Figure 6-26, callout 1).
4 Re-route the cable running across the top of the assembly so that it is out of the way.
Caution
Do not touch the scanner mirror located under the forward edge of the assembly.
Use approved ESD handling procedures when touching the Beam Detect PCA.
5 Remove (4) screws, CH105 (Figure 6-26, callout 2).
To Reinstall:
Make sure that the locator pins are properly seated.
Laser/Scanner Assembly
Figure 6-26
6
Removal and
Replacement
Removal and Replacement 6-41