A SERVICE OF

logo

Open as PDF
next previous
Solenoid Assembly, SL3 (Face-Up)
1 Remove the top cover (see Figure 6-8).
2 Remove the Delivery Unit (see Figure 6-10).
3 Remove (1) self-tapping screw, CH107 (Figure 6-50, callout 1).
Caution
Be careful not to damage the plastic arm when removing the assembly.
4 Pull the forward end of the assembly away from the chassis to clear the
locating pin, and slide it forward to clear two retaining tabs.
Face-Up Solenoid Assembly, SL3
Figure 6-50
6
Removal and
Replacement
Removal and Replacement 6-63