Enclosure management commands 132
DHCPv6: Disabled
Stateless address autoconfiguration (SLAAC): Enabled
Onboard Administrator #1 Network Information:
Name: OA-E4115BECFBAB
- - - - - IPv4 Information - - - - -
DHCP: Enabled - Dynamic DNS
DHCP-Supplied Domain Name: Enabled
Domain Name: americas.hpqcorp.net
IPv4 Address: 16.84.194.23
Netmask: 255.255.252.0
Gateway Address: 16.84.192.1
- - - - - IPv6 Information - - - - -
Link-local Address: fe80::e611:5bff:feec:fbab/64
Static Address: Not Set
Stateless address autoconfiguration (SLAAC) Addresses:
(Not Set)
Static IPv6 DNS 1: Not Set
Static IPv6 DNS 2: Not Set
IPv6 Dynamic DNS: Enabled
IPv6 Static Default Gateway: (Not set)
IPv6 Current Default Gateway: (Not set)
- - - - - General Information - - - - -
Active DNS Addresses:
Primary: 16.110.135.52
Secondary: 16.110.135.51
Tertiary: Not Set
MAC Address: E4:11:5B:EC:FB:AB
Link Settings: Auto-Negotiation, 1000 Mbps, Full Duplex
Link Status: Active
Enclosure IP Mode: Disabled
- - - - - Advanced Settings - - - - -
User-Supplied Domain Name: Not Set
SHOW OA STATUS
• Command:
SHOW OA STATUS [ALL | <bay number> [{ , | - } <bay number>] | ACTIVE | STANDBY]]
• Description:
Displays health status for the Onboard Administrator. If you do not specify the Onboard Administrator,
the command defaults to the Active Onboard Administrator.
• Access level/Bay level:
All
• Restrictions:
None
• Example:
OA-0018FE27577F> SHOW OA STATUS
Onboard Administrator #1 Status:
