Enclosure network configuration commands 88
ENABLE ENCLOSURE_ILO_FEDERATION_SUPPORT
• Description:
Enables the Onboard Administrator support required to allow peer-to-peer network communication
necessary for iLO Federation among suitably capable iLOs within the enclosure.
IMPORTANT: Enable Enclosure iLO Federation Support only enables Onboard Administrator
support to allow the peer-to-peer network communication necessary for iLO Federation among
iLOs within the enclosure. To fully enable iLO Federation, each iLO must have the appropriate
firmware and be configured to participate in iLO Federation. For more information, see the HP
iLO 4 User Guide at the HP website (http://www.hp.com/go/ilo/docs).
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
ENABLE ENCLOSURE_IP_MODE
• Command:
ENABLE ENCLOSURE_IP_MODE
• Description:
Enables Enclosure IP Mode
• Access level/Bay level:
OA administrator, Operator
• Restrictions:
o When using enclosure IP mode only replace the standby OA module while the enclosure is powered
on to ensure persistence of Enclosure IP Mode settings.
o You cannot ENABLE ENCLOSURE_IP_MODE in FIPS Mode ON/DEBUG.
ENABLE FQDN_LINK_SUPPORT
• Command:
ENABLE FQDN_LINK_SUPPORT
• Description:
Enables the Onboard Administrator to display an FQDN-based web address link in addition to the
usual IP-based web address links used for accessing an iLO or interconnect from the Onboard
Administrator GUI. The Onboard Administrator queries a DNS server that performs a reverse lookup for
the FQDN of the device and generates the FQDN-based web address (formatted as
host-name.domain-name.com).
When the FQDN setting is enabled, the lists of URL links for all the appropriate devices (iLOs and
interconnects) are automatically refreshed and updated with the corresponding FQDNs.
FQDN link support is useful in IPv6-based remote access environments that depend on an IPv4-based
enclosure management network with IPv4 DNS. It is not meant for pure IPv6 environments with IPv6
DNS.
