User account commands 29
o
When in FIPS Mode OFF, the character set includes all printable characters. When in FIPS Mode
ON/DEBUG, the password must contain at least one character from three of the four types of
characters. The four types are upper-case, lower-case, numeric, and non-alphanumeric.
SET SESSION TIMEOUT
• Command:
SET SESSION TIMEOUT <timeout>
• Description:
Sets the number of minutes before inactive sessions are removed. The default setting is 1440.
• Access level/ Bay level:
OA administrator
• Restriction:
Valid session timeout values range from 10 to 1440 minutes (24 hours).
SET USER ACCESS
• Command:
SET USER ACCESS "<user name>" {ADMINISTRATOR | OPERATOR | USER}
• Description:
Sets the user access level. Additionally, use the ASSIGN command to give the user access rights to the
Onboard Administrator, server bays, and interconnect bays.
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET USER CONTACT
• Command:
SET USER CONTACT ["<user name>"] "<contact info>"
• Description:
Sets the contact information field for the user. If there is no <user name>, the command modifies the
contact information of the user who executed the command.
• Access level/Bay level:
o All users can modify their own contact information.
o The OA administrator can modify all users.
• Restrictions:
o The <user name> is case sensitive. The <contact info> must be a maximum of 20 characters long
and includes all alphanumeric characters, the dash, the underscore, and spaces.
o The default contact information is blank.
