Interconnect management commands 173
SHOW INTERCONNECT INFO
• Command:
SHOW INTERCONNECT INFO {PORT MAP | POWERDELAY | SESSIONS | STATUS} [ALL |
<bay number> | <bay number>-<bay number>]
• Description:
Displays:
o Interconnect type
o IPv4 information
o IPv6 information
o Manufacturer name
o Product name
o Product part number
o Product version
o Product serial number
o Asset tag
o VLAN ID
• Access level/Bay level:
All
Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
• Example:
OA-0018FE27577F> show interconnect info all
show interconnect info all
1. Ethernet
Product Name: HP VC Flex-10 Enet Module
Width: Single
URL to Management interface: http://172.16.1.149/
In-Band IPv4 Address: 172.16.1.149
User Assigned Name:
Part Number: 455880-B21
Spare Part Number: 456095-001
Serial Number: TW2931005D
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 115200
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
Firmware Version: 4.10
VLAN ID: 1
