Directory commands 44
SET LDAP SEARCH {1-6 } "<search content>"
• Description:
Sets up to six search contexts in priority order
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET LDAP SERVER
• Command:
SET LDAP SERVER {<ip address> | <dns name> | NONE }
• Description:
o Sets the IP address or the DNS name of the LDAP server used for authentication.
o To set the LDAP server field to blank, use keyword NONE.
• Access level/Bay level:
OA administrator
• Restrictions:
<ip address> can be either an IPv4 address or an IPv6 address. IPv6 addresses must be informed
without the network prefix length.
o IPv4 address—###.###.###.### where ### ranges from 0 to 255
o IPv6 address—####:####:####:####:####:####:####:#### where #### ranges from 0 to
FFFF. A compressed version of the same IPv6 address is also supported.
SHOW LDAP CERTIFICATE
• Command:
SHOW LDAP CERTIFICATE
• Description:
Displays all LDAP certificates that are in effect on the Onboard Administrator
• Access level/Bay level:
OA administrator
• Restrictions:
None
• Example:
OA-0016355E560A> SHOW LDAP CERTIFICATE
1 Certificate name: 17D6A5ECBF51A1A47D44C1CDD29D19EE.pem
-----BEGIN CERTIFICATE-----
MIIHIzCCBgugAwIBAgIKFTKZbQAAAFx1EDANBgkqhkiG9w0BAQUFADB4MRMwEQYK
CZImiZPyLGQBGRYDbmV0MRcwFQYKCZImiZPyLGQBGRYHY3BxY29ycDEbMBkGCgmS
JomT8ixkARkWC2FzaWFwYWNpZmljMSswKQYDVQQDEyJIUFEgSXNzdWluZyBDQSBB
c2lhLVBhY2lmaWMgUmVnaW9uMB4XDTA3MTAyMDIyMzU0M1oXDTA5MTAxOTIyMzU0
