Enclosure Firmware Management commands 149
SHOW FIRMWARE LOG SESSION
• Command:
SHOW FIRMWARE LOG SESSION { ALL | <bay number> [{ , | - } <bay number>] }
• Description:
Displays the firmware log session for the selected server or range of servers
• Access level/Bay level:
o All
o Bay specific
• Restrictions:
You must have access to the specified bay number.
SHOW SERVER FIRMWARE
• Command:
SHOW SERVER FIRMWARE { ALL | <bay number> [{ , | - } <bay number>]}
• Description:
Displays the firmware log for the selected server or range of servers. Displays a summary of firmware
components in the specified server or range of servers. An exclamation mark (!) indicates firmware
mismatch or missing firmware information.
• Access level/Bay level:
o All
o Bay specific
• Restrictions:
o You must have access to the specified bay number.
o Different sides of the server bay cannot be designated within the same range.
• Example:
OA-00215AB0EA21> show server firmware 5
Device Firmware Information
Device Bay: 5
Discovered: Mon 2010-09-13 17:19:48
Firmware Component Current Version Firmware ISO
Version
-------------------------------------- --------------------
--------------------
System ROM I15 2009.07.10 I15 2009.07.10
ILO2 1.70 1.82
Power Management Controller 3.4 3.4
HP NC373i Multifunction Gigabit Server Boot code: 4.4.1 Boot code: 4.4.1
CLP: 1.3.6 CLP: 1.3.6
HP NC373i Multifunction Gigabit Server Boot code: 4.4.1 Boot code: 4.4.1
CLP: 1.3.6 CLP: 1.3.6
Smart Array E200i 1.86 1.86
- DG036A9BB6 (Bay 0) HPD0
