Enclosure Firmware Management commands 144
o
The bays_to_include feature only applies to ProLiant server blades. Integrity server blades do
not support this feature. Partner blade support is provided through the associated server blade
based on whether the firmware ISO supports the PCIe adapter card in the partner blade.
SET FIRMWARE MANAGEMENT FORCE
DOWNGRADE
• Command:
SET FIRMWARE MANAGEMENT FORCE DOWNGRADE { ENABLE| DISABLE }
• Description:
Sets the firmware update force downgrade policy. Enable this option to force all devices to have
firmware updated to the version supplied by the ISO, even if a newer version is currently installed on the
device. This option is disabled by default.
• Access level/Bay level:
OA administrator
• Restrictions:
o When forcing a downgrade of the Onboard Administrator to an earlier version of the firmware,
current settings that are inapplicable to the earlier version may be lost.
o When the Onboard Administrator is in VC mode and IPv6 is enabled, the Virtual Connect Manager
may specify a minimum expected firmware version for the Onboard Administrator. When this
situation occurs, disabling Onboard Administrator IPv6 communication prior to the downgrade
attempt makes it possible for VC to interoperate with older Onboard Administrator versions.
SHOW FIRMWARE
• Command:
SHOW FIRMWARE { MANAGEMENT | SUMMARY | LOG }
• Description:
Displays all the firmware management settings followed by a list of all firmware in the enclosure. It
includes a list of the extended server firmware information on all servers that have completed discovery
or update.
SHOW FIRMWARE MANAGEMENT
• Command:
SHOW FIRMWARE MANAGEMENT
• Description:
Displays enclosure firmware management configuration settings
• Access level/Bay level:
All
• Restrictions:
None
