Remote syslog commands 182
Remote syslog commands
DISABLE SYSLOG REMOTE
• Command:
DISABLE SYSLOG REMOTE
• Description:
Disables remote system logging
• Access level/Bay level:
OA administrator, OA operator
Restrictions:
To perform this command, you must be an operator or administrator with OA permission.
ENABLE SYSLOG REMOTE
• Command:
ENABLE SYSLOG REMOTE
• Description:
Enables remote system logging
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
To perform this command, you must be an operator or administrator with OA permission.
SET REMOTE SYSLOG PORT
• Command:
SET REMOTE SYSLOG PORT <port>
• Description:
Sets the IP port number for remote system log. Setting the remote port is optional. If the remote port is not
set, then the default UDP port 514 is used to send system log messages.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
The remote port must be an integer between 1 and 65535 inclusive.
