A SERVICE OF

logo

Configuring LAT Characteristics 6-17
RESPONDER Characteristic
Changing the RESPONDER Characteristic
The factory default setting for the RESPONDER characteristic is disabled. To enable
it, use the following command:
Local> CHANGE SERVER RESPONDER ENABLED
Use the SHOW SERVER command to determine the current setting. When the feature
is enabled, “RESPONDER” is displayed as one of the enabled characteristics.
Along with enabling the RESPONDER characteristic, you must set the access server
group codes so that they intersect those of all the nodes offering the service.
Enabling or disabling the RESPONDER characteristic has no affect on the access
server ability to respond to Solicit Information messages for services it offers locally.