Displaying Information About the Access Server
17-18 Managing the Access Server
Active Ports Ports that have either interactive sessions or remote
access connections.
Active Users Ports that have interactive sessions.
Queue Entries Queued connection requests that are in the access
server queue.
Available Services
(LAT protocol only)
Network services that the access server recognizes
as being available to users on the access server. (The
information about these services is stored in access
server memory.)
Local Services (LAT
protocol only)
Number of LAT services offered by the access
server.
Reachable Nodes (LAT
protocol only)
Computers or other access servers that offer services
on the network and that are reachable for service
connections.
Active Circuits LAT virtual circuits on which the access server has
active connections with service nodes.
Connected Nodes Service nodes with which the access server has
established LAT virtual circuits.
Connected Sessions Total number of LAT, Telnet, and SLIP sessions on
the access server.
Total number of LAT, Telnet, and SLIP sessions on
the access server.
% CPU Used Percentage of processing time the access server
used. This value is calculated every second.
% Memory Used Percentage of the general memory pool being used.
Minutes to Shutdown Number of minutes remaining on the initialize
timer. If no INITIALIZE command is in effect, N/A
is displayed to indicate not applicable.
Discarded Nodes Number of nodes that could not be entered into the
access server database, because of the value set for
the node limit characteristic or because of a lack of
memory. If this count is nonzero, the access server
might be experiencing resource problems.
Field Description
