Displaying IPX Status
20-24 Managing IPX
Displaying IPX Status
Using the SHOW IPX Command
Use the SHOW IPX command to display IPX status. The command is nonprivileged.
IPX Status Display
The following example shows the command to display IPX status on an access server:
Local> SHOW IPX STATUS
IPX Status:
Route entries: 6
RIP entries: 6
SAP entries: 5
LAN Frame: ETHERNET LAN Network: AAA1
LAN Frame: RAW802 LAN Network: Learning
LAN Frame: SAP802 LAN Network: BBB1
LAN Frame: SNAP802 LAN Network: Disabled
Fields in the IPX Status Display
The following table describes the fields in the IPX Status display:
Field Description
IPX Status Enabled or Disabled.
RIP entries Number of current RIP networks known by the server.
SAP entries Number of current SAP services known by the server.
Route entries Number of current routing table entries.
LAN Frame The frame type: Ethernet, RAW802, SAP802, or SNAP802.
LAN Network Learning — The network number for the corresponding LAN
frame has been configured to “learn.” The access server is
currently attempting to learn the network number.
XXXXXXXX
— Either the network number for the
corresponding LAN frame has been configured to “learn” and
the network number has been automatically learned, or an
explicit network number has been configured. The number is
up to 8 hexadecimal digits (no leading zeroes).
Disabled — The network number for the corresponding LAN
frame has been configured as “disabled.”
