A SERVICE OF

logo

Load Host Procedures
4-2 Managing Load Hosts
Load Host Procedures
Description
The specific command procedure that you use to manage the load host depends on the
network version, protocol, and operating system of the load host. The following table
lists the available combinations, with a reference to the related section in this chapter:
Load Host
Command
Procedure
Network Protocol Operating
System
Refer to:
DSV$CONFIGURE DECnet
Phase IV
DECnet/
OSI
MDS OpenVMS DSV$CONFIGURE
DSV$CONFIG DECnet
Phase IV
DECnet/
OSI
MOP ULTRIX DSVCONFIG
/etc/add_DECserver TCP/IP BOOTP/
TFTP
UNIX/
DIGITAL
UNIX
Using a BOOTP/TFTP
Server
/etc/list_DECserver TCP/IP BOOTP/
TFTP
UNIX/
DIGITAL
UNIX
Using a BOOTP/TFTP
Server
/etc/rem_DECserver TCP/IP BOOTP/
TFTP
UNIX/
DIGITAL
UNIX
Using a BOOTP/TFTP
Server
/etc/upd_DECserver TCP/IP BOOTP/
TFTP
UNIX/
DIGITAL
UNIX
Using a BOOTP/TFTP
Server
Access Server Loader
and Access Server
Manager
TCP/IP BOOTP/
TFTP
Windows NT
/Windows 95
Access Server Manager
online help and the
DECserver Network
Access Software
Installation
guide