Displaying SLIP Characteristics
15-4 Configuring and Managing SLIP Ports
Displaying SLIP Characteristics
Introduction
The LIST/SHOW/MONITOR SLIP CHARACTERISTICS command enables you to
display the SLIP configuration for a given port. The characteristics that you manage
are the host address, the Maximum Transmission Unit (MTU) and the compression.
If you change SLIP characteristics while a SLIP session is already established, the
changes have no effect until you start a new SLIP session.
Command
Use the SHOW PORT
n
SLIP CHARACTERISTICS command to display SLIP
characteristics.
Displaying SLIP Characteristics Example
The following example shows a typical SLIP characteristics display:
Local> SHOW PORT 5 SLIP CHARACTERISTICS
Port 5: Rick Server: Servername
Host Address: 17.20.19.7 MTU: 1006
Header Compression: Disabled Compression States: 16
