Managing Load Hosts 4-3
DSV$CONFIGURE
DSV$CONFIGURE
Introduction
DSV$CONFIGURE is a command procedure that runs on a DECnet Phase IV
OpenVMS load host or on a DECnet/OSI OpenVMS load host. This procedure enables
you to:
• Maintain configuration information about access servers.
• Modify the local MOP (Maintenance Operation Protocol) client configuration.
• Access the remote console port of the access server.
DIGITAL provides DSV$CONFIGURE as part of the access server software. For
information about installing DSV$CONFIGURE, refer to the installation guide
provided with the access server software.
Backward Compatibility of DSV$CONFIGURE
DSV$CONFIGURE supports both DECnet Phase IV and DECnet/OSI Phase V. Upon
installation, DSV$CONFIGURE automatically converts databases created by
DSVCONFIG to the data format required by DSV$CONFIGURE.
Executing DSV$CONFIGURE
The procedure DSV$CONFIGURE.COM is located in the following directory:
SYS$COMMON:[DECSERVER]
Execute this procedure as follows:
$
@SYS$COMMON:[DECSERVER]DSV$CONFIGURE
Defining Symbols
You may find it useful to define a symbol for this procedure in your LOGIN.COM file.
For example:
$ DSV == "@SYS$COMMON:[DECSERVER]DSV$CONFIGURE"
