A SERVICE OF

logo

Open as PDF
next previous
Initializing the Access Server 5-7
Using NCP to Initialize the Access Server
Using NCP to Initialize the Access Server
NCP Initialization Commands
The following table shows the NCP commands used to initialize the access server if
you are on a load host:
The NCP LOAD and TRIGGER commands do not have any automatic warning or
delay options. However, you can warn users about an impending initialization by using
the access server BROADCAST command.
NCP Reference
For more information about NCP, refer to the documentation provided with the host
system.
NCP Initialization
Commands
Description
LOAD Ensures that the host at which you issue the
command is the node that performs the load.
TRIGGER Causes the access server to load the software
image from any host on the network.