480 Supported MIBs
Table 89
Supported MIBs (cont’d.)
MIB Description
•
ifInUnknownProtos
•
ifOutNUnicast
IP-FORWARD-MIB
The following group is implemented:
• ipCidrRouteGroup
IP-MIB
The following groups are implemented:
•
ipGroup
• icmpGroup
NORTEL-SECURE-ACCESS-SWITC
H-MIB
Contains objects for monitoring the Nortel SNAS devices.
The following groups are implemented:
•
snasBasicGroup
• snasEventGroup
SNMP-FRAMEWORK-MIB
The following group is implemented:
•
snmpEngineGroup
SNMP-MPD-MIB
The following group is implemented:
•
snmpMPDGroup
SNMP-NOTIFICATION-MIB
The following group is implemented:
•
snmpNotifyGroup
Write access to all objects in this MIB is turned off in
VACM.
SNMP-TARGET-MIB
The SNMP-TARGET-MIB contains information
about where to send traps. You can configure
and view trap information from the CLI, using the
/cfg/sys/adm/snmp/target command (see
“Configuring SNMP notification targets” (page 331)).
The following groups are implemented:
• snmpTargetCommandResponderGroup
•
snmpTargetBasicGroup
• snmpTargetResponseGroup
Write access to snmpTargetParamsTable is turned off in
VACM.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.
