48 Netra 440 Server System Administration Guide • August 2004
■ To create your own device alias for a physical device, type:
where alias-name is the alias that you want to assign, and physical-device-path is the
full physical device path for the device.
Note – If you manually disable a device using asr-disable, and then assign a
different alias to the device, the device remains disabled even though the device
alias has changed.
2. To cause the parameter change to take effect, type:
The system permanently stores the parameter change.
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
▼ To Reconfigure a Device Manually
1. At the ok prompt, type:
where the device-identifier is one of the following:
■ Any full physical device path, as reported by the OpenBoot show-devs
command
■ Any valid device alias, as reported by the OpenBoot devalias command
■ Any device identifier from TABLE 2-2
Note – The device identifiers are not case sensitive. You can type them as uppercase
or lowercase characters.
You can use the OpenBoot asr-enable command to reconfigure any device that
you previously unconfigured with the asr-disable command.
ok devalias alias-name physical-device-path
ok reset-all
ok asr-enable device-identifier
