iTherm
®
280 Programmer’s Guide Programming Codes
28-07764 Rev C Page 187
Supported TM-T90 Commands
Print and Feed Commands
Command Name Page
LF 0AH Print and line feed 191
CR 0DH Print and carriage return 191
ESC d 1BH,64H Print and feed <n> lines 191
ESC e 1BH,65H Print and reverse feed <n> lines 191
ESC J 1BH,4AH Print and feed paper <n> vertical units 192
ESC K 1BH,4BH Print and reverse feed [<n> x (1/144)]
inches
192
ESC j 1BH,6AH Print and reverse feed 192
Line Spacing Command
Command Name Page
ESC 2 1BH,32H Select default line spacing, 1/6 lpi 193
ESC 3 1BH,33H Set line spacing 193
Character Commands
Command Name Page
ESC SP 1BH,20H Set right-side character spacing 193
ESC ! 1BH,21H Select print mode(s) 199
ESC % 1BH,25H Select/cancel user-defined character sets 193
ESC & 1BH,26H Define user-defined characters 194
ESC - 1BH,2DH Turn underline mode on/off 199
ESC 4 1BH,34H Set italics mode 201
ESC 5 1BH,35H Reset italics mode 201
ESC ? 1BH,3FH Cancel user-defined characters 194
ESC E 1BH,45H Turn emphasized mode on/off 199
ESC G 1BH,47H Turn on/off double-strike mode 200
ESC M 1BH,4DH Select character font 194
ESC R 1BH,52H Select an international character set 195
ESC V 1BH,56H
Turn on/off 90° rotation mode
200
ESC [ T 1BH,5BH, 54H Select character code table 196
ESC ^ 1BH,5EH Print control character 198
ESC r 1BH,72H Select color 198
ESC t 1BH,74H Select character code table 198
ESC { 1BH,7BH Turn on/off upside-down printing mode 200
GS ! 1DH,21H Set character size 201
GS # 1DH,23H Insert euro character 198
GS B 1DH,42H Turn white/black reverse printing mode
on/off
198
Panel Button Commands
Command Name Page
ESC c 5 1BH,63H, 35H Enable/disable panel buttons 202
Table 18 Supported EPOS Commands
