Tripp Lite B070-008-19-IP Manual

next previous

2. Web Conﬁguration Interface

TheNetCommanderIPcanbeaccessedintwoways:locallyviathelocalconsoleOSD,orremotelyviatheWebCongurationInterface.

ThissectionofthemanualdetailstheWebCongurationInterface,whichcanbeusedtoaccessthecomputer/serversandotherdevices

connectedtotheKVM,aswellastoconguretheKVM’ssettingsandaccounts.

2.1 Logging Into the Web Conﬁguration Interface

Note:

• Before logging on the ﬁrst time, verify that you have the latest Java installed on your computer (Java 1.6 or higher is required). If not, you

can download and install Java from http://www.java.com/en/download/index.jsp.

• Only SSL connections are allowed, so you must start the IP address with HTTPS, not HTTP.

1. Openyourwebbrowser(seetheClient Computer Compatibility sectionofthismanualforbrowsersupport)andenterintheIPaddress

of the KVM.

2. WhenloggingintotheKVMfromyourwebbrowser,aSecurityAlertmessageappearstoinformyouthatthedevice’scerticateisnot

trusted,andasksifyouwanttoproceed.Youhavetwooptions:

• If you are working on a computer other than your own, accept the certiﬁcate for just this session by clicking to proceed.

• If you are working at your own computer, install the certiﬁcate. Reference the instructions in the Security Certiﬁcate Installation

section of this manual.

3. Uponinstallingthecerticateoracceptingtheunrecognizedcerticateforthecurrentsession,theJavaapplicationbeginstoinstall.

Before the installation completes, a security warning may appear stating that the connection to this website is untrustworthy. This is

asecurityissuesimilartooneyougetfromyourwebbrowser.Youcanchoosetocontinueanyway,orinstallthecerticateintheJava

control panel. Refer to the Security Certiﬁcate Installation section of this manual for further instructions.

4. After installation has completed, the login page appears. If the login page does not appear on its own, click the Log On button in the

center of the web page to bring it up. If clicking on the Log On button does not bring up the login page, add /targets.jnlp to the end of

your IP address.