This Technical Manual is used to operate and program the
SCANTEAM 3700 Wedge.
Special Pages
A Sample Bar Codes page (located on page 14-4) contains bar code
symbols you may scan to verify that your scanner has been
programmed correctly.
Charts listing the factory default selections are included on the pages
just before the Sample Bar Codes. On the programming menu pages,
default selections are indicated by a ✱" next to the bar code title.
A Bar Code Data Chart (found on the inside back cover of this manual)
contains alphanumeric bar codes for setting additional programming
options, such as the digits representing Symbology Message Length.
The information on the menu pages explains how to use this chart.
Disclaimer
Welch Allyn, Data Collection, Inc. (d/b/a Hand Held Products) reserves the right to make changes in
specifications and other information contained in this document without prior notice, and the reader should in all
cases consult Hand Held Products to determine whether any such changes have been made. The information in
this publication does not represent a commitment on the part of Hand Held Products.
Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information which is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated into another language without the prior
written consent of Hand Held Products.
E2000 Welch Allyn Data Collection, Inc. All rights reserved.
Web Address: www.handheld.com
