SCANTEAM 3700 Wedge Technical Manual
14–2
14.3 Symbology Menu Defaults - Industrial
Matrix 2 of 5
The following chart lists the factory default Industrial Symbology Menu settings
(indicated by a
✱" on the programming menu pages).
Parameter Name
Page
Reference
Default Setting
Code 39 Selections
Codabar Selections
Codabar On Page 6-3
StartĂ/ĂStop Characters Don't Transmit Page 6-3
Message Length Min = 4, Max = 60 Page 6-4
Check Character No Check Character Page 6-4
Concatenation Allow Page 6-5
Decoding Adaptive Page 6-3
Code 93 Selections
Interleaved 2 of 5 Selections
Code 39 On Page 6-6
StartĂ/ĂStop Characters Don't Transmit Page 6-6
Message Length Min = 0, Max = 48 Page 6-8
Check Character No Check Character Page 6-8
Full ASCII Enable Page 6-7
Append Disable Page 6-7
Decoding Adaptive Page 6-7
Code 93 On Page 6-10
Page 6-10Message Length Min = 0, Max = 64
Interleaved 2 of 5 On Page 6-11
Message Length Min = 4, Max = 80 Page 6-12
Check Digit No Check Digit Page 6-12
Decoding Adaptive Page 6-11
Code 2 of 5 Selections
Code 2 of 5 On Page 6-13
Page 6-13Message Length Min = 4, Max = 48
Matrix 2 of 5 Selections
On Page 6-14
Page 6-14Message Length Min = 4, Max = 80
Code 11 Selections
Code 11 On Page 6-15
Check Digits Required 2 Check Digits Page 6-15
Message Length Min = 4, Max = 80 Page 6-15
Code 128 Selections
Code 128 On Page 6-16
Page 6-16Message Length Min = 0, Max = 80
