6–1
SCANTEAM 3700 Wedge Technical Manual
Symbology Menu
6
6.1 Introduction
Use this chapter to program the SCANTEAM 3700 Wedge for Industrial and Retail
Symbology selections.
This programming section contains the following menuing selections:
• Codabar Selections • Code 11 Selections
• Code 39 Selections • Code128 Selections
• Code 93 Selections • EAN Selections
• Interleaved 2 of 5 Selections • UPC Selections
• Code 2 of 5 Selections • MSI Selections
• Matrix 2 of 5 Selections • Plessey Selections
Industrial Symbologies
About Codabar, Code 39, Interleaved 2 of 5 Programming
Codabar, Code 39, and Interleaved 2 of 5 programming allows you to:
• Enable or disable symbology decoding.
• Program all symbology options, such as Startā/āStop Characters,
Adaptiveā/āTraditional Decoding, Check Charactersā/āDigits, and others.
• Set minimum and maximum Message Length.
About Code 93, Code 2 of 5, Matrix 2 of 5 Programming
Code 93, Code 2 of 5, and Matrix 2 of 5 programming allows you to:
• Enable or disable symbology decoding.
• Set minimum and maximum Message Length.
About Code 11 Programming
Code 11 programming allows you to:
• Enable or disable symbology decoding.
• Select Check Digits Required.
• Set minimum and maximum Message Length.
About Code 128 Programming
Code 128 programming allows you to:
• Enable or disable symbology decoding.
• Set minimum and maximum Message Length.
