Filter
Top Products
Connecting the 3CCE589EC PC Card
3
Connecting the 3CCE589EC PC Card
1 Remove PC Cards from your notebook and turn it on.
2 If you are using the RJ-45 connector, connect the PC
Card COMBO cable to the 3CCE589EC PC Card.
a
Connect one RJ-45 connector on the network cable to
the PC Card COMBO cable.
b
Insert the other RJ-45 connector into the network port.
c
Insert the PC Card into the PC Card slot and slide it all
the way in.
You may see prompts for driver installation.
d
Go to Chapter 2 to install the network driver that allows
you to login to the network.
3 If you are using the BNC T-connector, connect the PC
Card COMBO cable
➀
to the 3CCE589EC PC Card.
a
Connect the BNC T-connector to the PC Card COMBO
cable
➁
.
You must supply your own BNC T-connector.
Figure 3
Connecting the 3CCE589EC PC Card
b
Connect the BNC T-connector to the Ethernet cable
➂
.
c
Insert the PC Card into the PC Card slot
➃
and slide it all
the way in.
CAUTION:
Do not force the PC Card into the slot or you
may bend the pins inside the slot.