Filter
Top Products
Connecting the 3CXE589EC PC Card
5
Connecting the 3CXE589EC PC Card
1 Remove all PC Cards from your notebook and turn it on.
2 If you are using the XJACK RJ-45 connector, connect
one RJ-45 connector on the network cable to the
3CXE589EC PC Card XJACK connector
➀
, as shown
in Figure 4.
a
Insert the other RJ-45 connector into the network
port
➁
.
b
Insert the PC Card into the PC Card slot
➂
and slide it all
the way in.
You may see Windows prompts for driver installation.
c
Go to Chapter 2 to install the network driver that allows
you to login to the network.
3 If you are using the BNC T-connector, connect the PC
Card COMBO cable
➀
to the 3CXE589EC PC Card.
a Connect the BNC T-connector to the PC Card COMBO
cable
➁
.
You must supply your own BNC T-connector.
Figure 5 Connecting the 3CXE589EC PC Card
b Connect the BNC T-connector to the Ethernet cable
➂
.
c Insert the PC Card into the PC Card slot
➃
and slide it all
the way in.
You may see Windows prompts for driver installation.
Go to Chapter 2 to install the network driver that allows
you to login to the network.