Filter
Top Products
18 CHAPTER 2: INSTALLING THE NETWORK DRIVER
Installing the Network Driver
1 Using the Windows menu, select Network.
2 Select Network Setup.
3 In the Network Setup dialog box, select the
Networks... button.
4 Select Install Microsoft Windows Network and then
click OK.
5 Select the Drivers... button.
6 In the Network Drivers dialog box, click Add Adapter.
A dialog box appears, listing the supported network
adapters on the diskette.
7 From the list of network adapters, select Unlisted Or
Updated Network Adapter and click OK.
A dialog box appears, prompting you to specify the drive or
directory where the ELPC3.DOS driver can be found.
8 Insert LAN Installation Disk 2 in the floppy drive.
9 Click OK to accept the default directory.
10 Select 3Com Megahertz LAN PC Card and click OK.
11 In the Network Drivers dialog box click Close.
12 In the Network Setup dialog box click OK.
13 If prompted, supply the information you gathered
before you began the installation. After you enter
the information, click OK.
If you are prompted for a disk with updated or vendor
provided ELPC3.DOS, insert LAN Installation Disk 2 and
click OK to accept the default directory.
A message appears, prompting you to restart your PC.
14 Click Continue instead.