Filter
Top Products
24
■ IP Address Mode — Specifies whether IP functionality is
enabled via automatic IP configuration, manual configuration
(static) or dynamically using DHCP (Dynamic Host
Configuration Protocol).
■ IP Address — The IP address of the Switch, and the address
of the default VLAN (VLAN1).
■ Subnet Mask — This mask identifies the host address bits
used for routing to specific subnets.
■ Default Gateway — The IP address of the gateway router
between this device and management stations that exist on
other network segments.
■ MAC Address — The MAC address of this switch.
Click Apply to save any changes you have made.
Port Configuration
You can use the Basic Port Configuration page to display the
current connection status, including the link status and
speed/duplex mode.
Figure 10 Basic Port Configuration Screen
■ Number — Number of ports.
■ Label — Port name.
■ Status — Shows if the interface is enabled or disabled.
■ Flow Control — Shows if flow control is enabled or disabled.