Filter
Top Products
DUA1602-0AAA01
3-4
C
HAPTER
3: C
ONFIGURING
T
HE
M
ANAGEMENT
M
ODULE
IP address, type:
IP a.b.c.d
where a, b, c, and d are numbers
between 0 and 255.
The new values do not appear until you press [Enter] on a blank
command line to redisplay the screen.
If you enter a command without a new value, the existing value for
that option appears. If you enter an invalid value, the screen
displays a range of valid values.
You can refresh the Main Configuration screen to show your
changes by typing
CF
and pressing [Enter]. The configuration
settings you can change are described in the following sections.
IP address (IP)
Type
IP
followed by a space and the Internet address assigned to
the Management Module to change the IP address.
Use the format a.b.c.d, where a, b, c, and d are numbers between
0 and 255. If you type a number that is not in this range, an error
message appears.
If you do not know the IP address to use, contact your network
administrator.
Press [Enter] to save the new setting and return to the
configuration screen.
Netmask (NM)
Type
NM
followed by a space and the Netmask value to change
the netmask value.
Use the format a.b.c.d, where a, b, c, and d are numbers between
0 and 255. If you type a number that is not in this range, an error
message appears. If your local network is partitioned into subnets,
be sure to set this value to show that (for example, 255.255.0.0).