Filter
Top Products
DUA1602-0AAA01
3-8
C
HAPTER
3: C
ONFIGURING
T
HE
M
ANAGEMENT
M
ODULE
Set-community name (CS)
Type
CS
followed by a space and the community name to change
the community name the SNMP manager uses when performing
set or get operations.
Type up to 16 alphanumeric characters to specify the
set-community name. This field is case-sensitive and cannot contain
blanks.
Press [Enter] to save the new setting and return to the
configuration screen.
Trap Community name (CT)
Type
CT
followed by a space and the community name to change
the community name that is sent along with the traps to your
network manager.
Type up to 16 alphanumeric characters to specify the trap
community name. This field is case-sensitive and cannot contain
blanks.
Press [Enter] to save the new setting and return to the
configuration screen.
sysName (SN)
To change the system name field type
SN
followed by a space and
the “system name“. You must use quotes to enclose the system
name. Type the system name assigned by your system administrator
(up to 63 alphanumeric characters).
The name you enter is used by network operators, and is not used
for network addressing. (If you do not specify a system name
here, you can do so using your SNMP management application.)
Press [Enter] to save the new setting and return to the
configuration screen.