Filter
Top Products
DUA1602-0AAA01‘
Changing the Configuration Fields 3-5
If you do not know the Netmask value to use, contact your
network administrator.
Press [Enter] to save the new setting and return to the
configuration screen.
Gateway (GW)
To change the default gateway, type
GW
followed by a space and
the default gateway. The default gateway is the default
destination for all packets not addressed to the local network
segment. This value
must
be set if you have routers in your
network.
Use the format a.b.c.d, where a, b, c, and d are numbers between
0 and 255. If you type a number that is not in this range, an error
message appears. If there is not a primary gateway, type
GW
0.0.0.0.
If you do not know the default gateway, contact your network
administrator.
Press [Enter] to save the new setting and return to the
configuration screen.
Token Ring Network Speed (RS)
(Token-Ring model only)
Type
RS
followed by a space and the speed (in Mbps) of your
Token-Ring network. Type
4
for a 4-Mbps Token Ring, or
16
for a
16-Mbps Token Ring. The default speed is 16 Mbps.
Press [Enter] to save the new setting and return to the
configuration screen.