Filter
Top Products
DUA1602-0AAA01‘
Host Table Setup Screen 3-11
IP Address (HI)
Type
HI
and the host number followed by a space and the IP
address of the host entry that you want to modify.
Use the format a.b.c.d, where a, b, c, and d are numbers between
0 and 255. If you type a number that is not in this range, an error
message appears.
Press [Return] to save the new setting and return to the host access
list.
Delete Entry (DE)
To remove a configured host, you can change its IP address to a
new value, if one exists. Otherwise, use the Delete Entry command.
To delete the entry, type
DE
and the host number and press
[Return].
Only eight hosts can be stored in the permanent memory.
Ping (PI)
The Ping option verifies the host’s physical address. If you are
connected to the network, you can use the Ping function to verify
a host’s address. Type
PI
and the host number followed by a space
and the IP address. Press [Return] to send the command.
If the ping is successful, the Management Module responds with
the following message:
ping Successful: Round Trip Time=xx.xx sec
If the ping is unsuccessful, the module displays an error message.
Trap Level (TL)
To set the trap level, type
TL
and the host number followed by a
space and the trap level. The possible values for the trap level are: