Filter
Top Products
30 CHAPTER 2: I/O AND APPLICATION MODULES
Panel and LEDs Figure 12 3C17511 module panel
The 3C17511 module has two port LEDs for the 10GE port on its panel.
Matching Cable See Table 64 on page 45 for the XENPAK optical modules available to the 10GE
XENPAK/SC optical/electrical port on the 3C17511 module and their matching
cable types, which you can select as required.
3C17512 2-port
10GBASE-X (XFP)
Module
This section provides specifications for the 2-port 10GBASE-X (XFP) module
(3C17512).
Specifications The 3C17512 modules provide two 10GBASE-X XFP/LC ports.
SDRAM 128 MB/256 MB
Physical dimensions (W x D) 366.7 x 340 mm(14.4 x 13.4 in.)
Max power consumption 45 W
Number of ports One
Connector XENPAK/SC
Rate 10 Gbps
Table 26 3C17511 module specifications
Item Specification
Table 27 Port LEDs on the 3C17511 module
LED Status Meaning
LINK OFF No link is present.
Green ON A link is present.
ACT OFF No packets are transmitted/received on the port.
Orange blinking Packets are being transmitted/received on the port.
Table 28 3C17512 module specifications
Item Specification
CPU MPC8245
Boot ROM 512 KB
SDRAM 128 MB/256MB
Physical dimensions (W x D) 366.7 x 340 mm (14.4 x 13.4 in.)
Max power consumption 87 W
Number of ports Two
Connector XFP
Rate 10 Gbps