Filter
Top Products
6
C
ONFIGURING
THE
C
ORE
B
UILDER
7000 F
AMILY
AT M
S
WITCH
This chapter describes the initial configuration of the CoreBuilder
®
7000
family ATM switch. Using the terminal connected to the control port, you
log into the system and assign network addresses to the CoreBuilder
7000 family ATM switch. This procedure enables the management of the
site to recognize and communicate with the CoreBuilder 7000 family
ATM switch. You also specify ATM connections between addresses, using
the ATM protocol you have selected.
The topics covered in this chapter include:
■
Logging in to the LMA
■
Integrated Fast Setup
■
Additional Switch Configuration
■
Viewing Network Statistics.
■
Storing and Retrieving Configuration Parameters
■
Upgrading from E-IISP to PNNI
Logging in to the
LMA
When you boot the CoreBuilder 7000 family ATM switch the following
login screen appears:
-------------------------------
- CoreBuilder 7000 -
- -
- ATM Backbone Switch -
-------------------------------
Access level (read, write, admin):admin
Password: