Filter
Top Products
Storing and Retrieving Configuration Parameters
75
Storing and
Retrieving
Configuration
Parameters
This section discusses the configuration upload/download facility and
includes the following topics:
■
Configuration Upload/Download
■
Organizing Configuration Files
■
Activating the Downloaded Configuration
■
Uploading the Configuration of a Card
■
Downloading the Configuration of a Card
■
Loading Software and Configuration Data by Utilities
Configuration
Upload/Download
You can store (upload) the configuration of an installed card from its flash
memory to an external disk and restore it (download) to the flash memory
of the original card — or to the flash memory of a different card of the
same type — at a later time. You can initiate this operation only through
the LMA and not via a SNMP management application like Transcend.
This feature lets you:
■
Back up your switch configuration in case of switch failure
■
Transfer the configuration from one switch to another
■
Maintain various standard configuration templates which can be
loaded according to requirement
The configuration upload works for individual cards installed in the
CoreBuilder 7000: either the active switch card or a CoreBuilder 7X00
Interface Card. You select the card whose configuration you want to
download or upload from a list of installed cards.
When the switch operates in single-IP mode, you can use this facility to
upload the configuration of any of the installed cards through the LMA of
the switch card. When the switch is operating in multiple-IP mode, you
can use this facility to upload the configuration of the switch card only.
Reset Signaling Statistics (4) STS: Statistics
(10) SIR: Signaling-reset counters
Resets the signaling counters for a specified port.
Table 17
Statistics Available
Menu Option Path Description