Filter
Top Products
Specifications A - 7
Modem Cable Pinouts
You can connect a modem to the RMON MultiProbe Module to allow a
remote client to have out-of-band access to the module if the main network
link fails. For example, you can access the RMON MultiProbe Module using
Serial Line Internet Protocol (SLIP).
From a management workstation (such as one using the 3Com ONdemand
LANsentry software), you can physically connect the RMON MultiProbe
Module to any of the following devices:
❑ Modem
❑ Data switch
❑ Serial line
Sample Out-of-Band Connections
Figure A-2 provides two examples of out-of-band connections to the RMON
MultiProbe Module in an ONline System Concentrator with the following
connections:
❑ Modem
❑ Direct SLIP
The modem that you connect to the RMON MultiProbe Module must be
Hayes-compatible.