Filter
Top Products
3 - 28 Ethernet RMON MultiProbe Module Installation and Operation Guide
Assigning the Module Default Gateway
You must assign a default gateway for the RMON MultiProbe Module.
To assign a default gateway:
1. From the Main menu, select option 1, Modify/View Configuration
Values, and press Return. The Modify/View Configuration Values
menu is displayed (see Figure 3-4).
2. From the Modify/View Configuration Values menu, select option 1,
Modify/View Network Settings, and press Return. The Modify/View
Network Settings menu is displayed (see Figure 3-6).
3. From the Modify/View Network Settings menu, select option 4 and
press Return. The module displays the current default gateway and
prompts you to enter a new value.
4. Enter the new default gateway.
5. To save the changes and return to the previous menu, select S.