Filter
Top Products
Configuring the Module 3 - 13
Note: All configuration settings except for the Autodiscovery
Echo Interval field value are preserved after a cold start.
Using the Modify/View Serial Configuration Values Menu
Use the Modify/View Serial Configuration Values menu to configure the
module RS-232 serial port to run Serial IP (SLIP):
❑ Over a direct link
❑ Using a modem
The Serial IP feature enables the RMON MultiProbe Module and a network
management workstation to communicate when a network link is not
available.
To display this menu, select option 6 from the Modify/View Configuration
Values Menu and press Return. The Serial Configuration Values menu is
displayed with factory-default settings for the serial port (Figure 3-5).
S
Save Changes and
Exit
Saves all changes to the configuration menu to
non-volatile memory and returns to the Main
menu.
0
Cancel Changes
and Exit
Cancels changes to the configuration menu and
returns to the Main menu.
Table 3-3. Modify/View Configuration Values Menu
Description (Continued)
Option Result