Filter
Top Products
3 - 38 Ethernet RMON MultiProbe Module Installation and Operation Guide
The following output is an example of the SHOW MODULE VERBOSE
command issued for an RMON MultiProbe Module installed in slot 6 of an
ONline System Concentrator:
ONline> show module 6 verbose
Slot Module Version Network General Information
---- ------------- ------- ------------- -------------------
06 RMON-EMP-3 Vx.xx PER_PORT Module is up
RMON-EMP-3: Ethernet RMON MultiProbe
Boot Version: vx.xx
Native Software Version: vx.xx
Native Boot Software Version: vx.xx
Show Port Command
The SHOW PORT command enables you to display brief and verbose
information on an individual interface or on all interfaces.
The syntax of the SHOW PORT command is:
SHOW PORT {
slot.port
} {verbose}
{
slot.
all} {no_verbose}
The following output is an example of the SHOW PORT ALL command
issued for a module installed in slot 6:
ONline> show port 6.all
Port Display for Module RMON-EMP-3:
Port Mode Status Network General Information
----- -------- --------------- ----------- ---------------------
06.01 LOGICAL OKAY ETHERNET_1
06.02 LOGICAL OKAY ETHERNET_2
06.03 LOGICAL OKAY ETHERNET_3