Filter
Top Products
Rack-Mounting the Switch 21
Figure 9 Installing the switch in a 19-inch rack
Mounting the Front
bracket
Mount the front bracket as shown in Figure 10 and Figure 11.
Figure 10 Mount the front bracket to the device
Figure 11 Mount the front bracket to the mount angel of the rack
Mounting the Rear
Bracket
The Switch 4500G 24-Port and Switch 4500G 48-Port units do not need rear
brackets. The description on mounting rear brackets is only for the Switch 4500G
PWR 24-Port and Switch 4500G PWR 48-Port.
Mount a screw on the back of the switch to closely connect the switch with the
rear bracket to support the switch. There are three positions for screw mounting
as shown in
Figure 12.
Front
bracket
Screw
Front
bracket
Screw
Screw
Front mount angle
Front
bracket
Screw
Front mount angle
Front
bracket