Filter
Top Products
Protocol
Select the protocol (TCP, UDP, TCP/ UDP) used
by the Server.
Internal Ports
Enter the range of internal port numbers.
External Ports
Enter the range of external port numbers.
Buttons
Defaults
This will delete any Servers you have defined,
and set the pre-defined Servers to use their
default port numbers.
Disable All
This will cause the "Enable" setting of all Virtual
Servers to be set OFF.
Update
Selected
Server
Update the current Virtual Server entry, using the
data shown in the "Properties" area on screen.
Add as new
Server
Add a new entry to the Virtual Server list, using
the data shown in the "Properties" area on
screen. The entry selected in the list is ignored,
and has no effect.
Delete
Delete the current Virtual Server entry. Note that
the pre-defined Servers can not be deleted. Only
Servers you have defined yourself can be deleted.
Clear Form
Clear all data from the "Properties" area, ready for
input of a new Virtual Server entry.
For each entry, the PC must be running the
appropriate Server software.
Defining your own Virtual Servers
If the type of Server you wish to use is not listed on the Virtual
Servers screen, you can define and manage your own Servers:
Create a new
1. Click "Clear Form"
108