Filter
Top Products
Data – WAN Port Screen
Port Settings
MTU Size
• MTU (Maximum Transmission Unit) value
should only be changed if advised to do so by
Technical Support.
• Enter a value between 1 and 1500.
• This device will still auto-negotiate with the
remote server, to set the MTU size. The
smaller of the 2 values (auto-negotiated, or
entered here) will be used.
• For direct connections (not PPPoE or PPTP),
the MTU used is always 1500.
Identification
Hostname
Normally, there is no need to change the default
name, but if your ISP requests that you use a
particular Hostname, enter it here.
Domain
Name
If your ISP provided a domain name, enter it here.
Otherwise, this may be left blank.
MAC Address
Also called Network Adapter Address or Physical
Address. This is a low-level identifier, as seen from
the WAN port.
Normally there is no need to change this, but some
ISPs require a particular value, often that of the PC
initially used for Internet access.
You can use the Copy from PC button to copy your
PC's address into this field, the Default button to
insert the default value, or enter a value directly.
IP Address
Automatic
Also called Dynamic IP Address. This is the default,
and the most common.
Leave this selected if your ISP allocates an IP
Address to the Wireless Router upon connection.
111