Filter
Top Products
Figure 31: Wireless Network Properties - WEP
Configure this screen as follows:
• Set Network Authentication to match the Wireless Broadband
Router. (If the setting on the Wireless Broadband Router is
"Auto", then either Open or Shared can be used.)
• For Data Encryption, select WEP.
• For the Network key and Confirm network key, enter the default
key value used on the Wireless Broadband Router. (Windows
will determine if 64bit or 128bit encryption is used.)
• The Key index must match the default key index on the
Wireless Broadband Router. The default value is 1.
• Ensu
re the options The key is provided for me automatically and
This is a computer-to-computer (ad hoc) network are unchecked.
56