Filter
Top Products
Rear Panel
Figure 2: Rear Panel
WPS Button
Push the WPS button on the router and on your
other wireless device to create an encryption-
secured wireless connection automatically.
10/100BaseT
LAN connections
Use standard LAN cables (RJ45 connectors) to
connect your PCs to these ports.
Note:
Any LAN port on the Wireless Broadband
Router will automatically function as an "Uplink"
port when required. Just connect any port to a
normal port on the other hub, using a standard
LAN cable.
WAN port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your
modem came with a cable, use the supplied
cable. Otherwise, use a standard LAN cable.
Reset Button
(Reset to
Defaults)
This button will reset the Wireless Broadband
Router to the factory default settings.
To do this, press and hold the Reset Button for
five (5) seconds, until the Status LED is lit, then
release the Reset Button, and wait the Wireless
Broadband Router to restart using the factory
default values.
Power port
Connect the supplied power adapter here.
9