Filter
Top Products
4 PC Configuration
This Chapter details the PC Configuration required
on the local ("Internal") LAN.
4.1 Overview
For each PC, the following may need to be configured:
• TCP/IP network settings
• Internet Access configuration
• Wireless configuration
4.2 Windows Clients
This section describes how to configure Windows clients for Internet
access via the Wireless Broadband Router.
The first step is to check the PC's TCP/IP settings.
The Wireless Broadband Router uses the TCP/IP network protocol
for all functions, so it is essential that the TCP/IP protocol be
installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Wireless Broadband Router settings,
and the default Windows TCP/IP settings, no changes
need to be made.
• By default, the Wireless Broadband Router will act as a DHCP
Server, automatically providing a suitable IP Address (and
related information) to each PC when the PC boots.
• For all non-Server versions of Windows, the default TCP/IP
setting is to act as a DHCP client.
38