Filter
Top Products
• Enable or Disable the Wireless Broadband Router's DHCP
Server function.
• Set the range of IP Addresses allocated to PCs by the DHCP
Server function.
You can assign Fixed IP Addresses to some devices
while using DHCP, provided that the Fixed IP
Addresses are NOT within the range used by the
DHCP Server.
Using another DHCP Server
You can only use one (1) DHCP Server per LAN segment. If you
wish to use another DHCP Server, rather than the Wireless
Broadband Router's, the following procedure is required.
• Disable the DHCP Server feature in the Wireless Broadband
Router. This setting is on the LAN screen.
• Configure the DHCP Server to provide the Wireless Broadband
Router's IP Address as the Default Gateway.
To Configure your PCs to use DHCP
This is the default setting for TCP/IP for all non-Server versions of
Windows.
See Chapter 4 - Client Configuration for the procedure to check
these settings.
25