3Com WBR-6000 Network Router User Manual


 
IP Address
The IP Address of this device, as seen by
Internet users. This address is allocated by your
ISP (Internet Service Provider).
Network Mask
The Network Mask associated with the IP
Address above.
PPPoE Link
Status
This indicates whether or not the connection is
currently established.
If the connection does not exist, the
"Connect" button can be used to establish a
connection.
If the connection currently exists, the
"Disconnect" button can be used to break
the connection.
Connection Log
Connection Log
The Connection Log shows status
messages relating to the existing
connection.
The most common messages are listed in
the table below.
The "Clear Log" button will restart the Log,
while the Refresh button will update the
messages shown on screen.
Buttons
Connect
If not connected, establish a connection to your
ISP.
Disconnect
If connected to your ISP, hang up the
connection.
Clear Log
Delete all data currently in the Log. This will
make it easier to read new messages.
Refresh
Update the data on screen.
70