Filter
Top Products
Data - Routing Screen
RIP
Enable RIP
V1
Check this to enable the RIP (Routing Information
Protocol) feature of the Broadband Router
The Wireless Router supports RIP V1 only.
Static Routing
Static
Routing
Table Entries
This list shows all entries in the Routing Table.
• The "Properties" area shows details of the
selected item in the list.
• Change any the properties as required, then
click the "Update" button to save the changes
to the selected entry.
Properties
• Destination Network - The network address
of the remote LAN segment. For standard class
"C" LANs, the network address is the first 3
fields of the Destination IP Address. The 4th
(last) field can be left at 0.
• Network Mask - The Network Mask for the
remote LAN segment. For class "C" networks,
the default mask is 255.255.255.0
• Gateway IP Address - The IP Address of the
Gateway or Router which the Wireless Router
must use to communicate with the destination
above. (NOT the router attached to the remote
segment.)
• Metric - The number of "hops" (routers) to
pass through to reach the remote LAN
segment. The shortest path will be used. The
default value is 2.
Buttons
Save
Save the RIP setting. This has no effect on the
Static Routing Table.
135