Filter
Top Products
For best Wireless reception and performance, the
Wireless Broadband Router should be positioned in
a central location with minimum obstructions
between the Wireless Broadband Router and the
PCs.
Also, if using multiple Access Points, adjacent
Access Points should use different Channels.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub
ports on the Wireless Broadband Router. Both 10BaseT and
100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub,
using a standard LAN cable. Any LAN port on the Wireless
Broadband Router will automatically function as an "Uplink" port
when required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the WAN port on the
Wireless Broadband Router (the RJ11 connector) to the ADSL
terminator provided by your phone company.
4. Power Up
Connect the supplied power adapter to the Wireless Broadband
Router. Use only the power adapter provided. Using a different
one may cause hardware damage.
5. Check the LEDs
• The PWR LED should be ON.
• For LAN (PC) connection, the LAN LED should be ON (provided
the PC is also ON.)
• The WLAN LED should be ON
• The WAN LED should be ON if ADSL line is connected.
• The NET LED may be OFF. After configuration, it should come ON.
12